|
|
Apartment house
Havlíček, Jakub ; Vacenovská, Veronika (referee) ; Utíkalová, Ivana (advisor)
This bachelor thesis deals with the project of two apartment blocks “A” and “B” in the village Rudíkov. These two objects are located in sloping terrain and both have two floors aboveground and one floor underground. In the apartment block “A” there are six apartment units aboveground and four garage units and storage area underground. In the apartment block “B” there are eight apartment units aboveground and two wheelchair accessible apartments with common storage areas underground. The objects are designed from a construction system made of ceramic blocks. The ceilings are monolithic and the roof is hipped with trusses. The thesis provides documentation for realization of the construction.
|
|
|
House with establishment
Podola, Michal ; Blahová, Pavla (referee) ; Čuprová, Danuše (advisor)
The project sloves a new family house with an establishment in a quiet location on the edge of the village Chomýž. The purpose of building is providing basic snacks for tourists and cyclists. The establishment offers indoor and outdoor seating. The house is situated in a slightly steep land near the local trails. It is a three-storey detached building with two floors. The Construction system consists of masonry Porotherm, further insulated system Baumit Open and horizontal structures Miako, also Porotherm. The roof is a part of nailed trusses with a angle of 12°. Above the building there is a single casting flat roof.
|
|
|
Guest house with wine cellar
Grégrová, Lenka ; Párová,, Jitka (referee) ; Rusinová, Marie (advisor)
The aim of this diploma thesis is creating a construction documentation for a guest house with a wine cellar. The guest house is a three-storey building. A lounge, which is also meant to serve for ceremonious social gatherings, staff facilities and two accessible rooms are located on the ground floor. First floor consists of several two-bed rooms, one common kitchen and a smaller lounge for guests. Accommodation units for larger groups of guests can be found on the top floor. Vertical supports are made of Porotherm system, ceilings are made of filigree-like reinforced concrete slabs. Roofing of the building is designed as a saddle roof with clay tiles and load-bearing nailed timber trusses. The building is situated in moderate, almost flat terrain. The wine cellar building consists of an underground cellar and a ground floor with a lounge, sanitary facilities and a staircase hall. External walls of the upper part of the cellar are made of CSB framework, partitions are made of Porotherm system, ceiling is made of reinforced concrete slabs. Roofing of the building is designed as a green roof. External walls of other parts of the building are also made of CBS framework, ceiling is a vault-like one supported by prefabricated beams and covered with Miako ceiling panels. The structure is situated in moderate, almost flat terrain, its cellar is sunk under ground level and covered with soil.
|
|
|
Detached house with design office
Hrbáček, Adam ; Holešovská, Anna (referee) ; Utíkalová, Ivana (advisor)
Topic of my bachelor thesis is creating design documentation on level of detailed design, Detached house with design office. Project contains engineering reports, drawings, thermal assessment, fire safety assessment, simplified foundation design and design of staircase. Designed house has partial basement with one above ground floor. Structural systém is mansory walls,based on strip foundations, staircase is cast-in-place reinforced concrete, ceiling is made of precast prestressed hollow core slabs, roof structure is made from timber truss beams on which is suspended thermal insulated, plasterboard ceiling. Project was designed by computer software ArchiCAD 16 and vizualization done by program Artlantis 4.
|
|
|
Christian Center Elijah
Koloničný, Libor ; Burianová, Lenka (referee) ; Smolka, Radim (advisor)
The aim of this master thesis is to prepare the project documentation for a building of a Christian centre. The building is designed for liturgical purposes, but also leisure activities and consists of two floors and a partial basement. The main parts of the building: Main hall for worship services, group of rooms for activities, small hall, tea room and a dwelling unit for the pastor. The floor plan of the building is shaped like the letter „V“, and the architectural design of the building does not interfere with the landscape. The building is set in slightly sloping terrain which forms a contrast with the opposite rising flat roof over the main hall.
|
|
|
Petrovice Community Center
Flašková, Veronika ; Lipka, Miroslav (referee) ; Eliáš, Luboš (advisor)
The subject of diploma project is the design of complex of buildings using hemp lime composite, in English known as Hempcerete. Four detached houses are completed by building of facilities. Buildings have one to three floors. The composite fiercly reduces carbon footprint in building industry. The design is focused on different construction systems using hemp lime composite as a wall filling. Detached houses are made of load bearing timber frame with cast-in-situ hempcrete, building of facilities is made of reinforced concrete with precasted blocks. All buildings are cellarless. Detached houses are shed roofed, building of facilities is gable roofed.
|
|
|
Nursery school
Horáček, Radek ; CSc, Dan Mrkos, (referee) ; Sedlák, Jiří (advisor)
Subject of my master’s thesis is to make project documentation for new building of nursery school. The building is single-storey, without basement and its capacity is 60 children divided into 4 classes. As foundation system of the building are used foundation strips. Floor plan of the building is irregular, main buildings orientation is to the south. Building is covered partially by a flat roof and partially by a truss roof.
|
|
|
Newly-Built Detached House in Oslavice
Pospíšilová, Iveta ; Soudek, Pavel (referee) ; Kalousek, Lubor (advisor)
The subject of this bachelor's thesis is a design of a new building for a family house in Oslavice and a processing of a project documentation for the realization of the building. The building is designed for purposes of family living and it is situated on the periphery in the east part of the village Oslavice. This part of the village is sparsely developed with family houses. The architectonical solution is designed with consideration of the building location and character of the surrounding housing development. The family house is designed as a one-family detached house intended for four- or five-member family. It is situated in a sloping terrain and it is designed as a partially basement. The designed building has two storeys above ground and a basement. On the first storey above ground there is a daily social zone, on the second storey above ground there is a quiet zone and in the basement there is a technical facility of the building. A part of the family house is a garage for deposition of one personal car. A part of the basement is placed ahead of the front entrance into the building and it is visually separated by using of wood exterior panelling. Roofing of the family house is solved by hipped truss roof and above the garage there is designed flat roof by which it is created a terrace accessible from the second storey above ground.
|
|
|
Car dealership
Mošaťová, Kristína ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
This Diploma thesis deals with the solution of project documentation for the new Suzuki car showroom building. The proposed object is situated in region of Nitra in Topolcany district, located in suburb part of Topolcany town. The car showroom is designed as a building consisting from the car shop - showroom and the services for Suzuki automobiles. The car shop - showroom is designed as the operation for car sales and the administration part on the second floor. This part of the building is covered with warm flat roof. The second part of the object - Car service is a one-floor building covered with wood, truss purlin constructure in the shape of a saddle roof and in inclination of 9 degrees. The supporting construction of the building consist from cast-in-place reinforced concrete frame in the showroom part and from masonry system Ytong system in other parts of the building.
|
|
|
High standard detached house
Vaňková, Michaela ; Ing.Tomáš Duriš (referee) ; Daněk, Lukáš (advisor)
This bachelor's work deal with study of high standard deteached house with the double garage. House is two – storey high with shed roof with prevailing dimentions 26 m x 10,6 m. Around the house is designed teracce follow up to garden. Entries to the house are from the teracce on first floor and from path on second floor. Supporting walls are made prom Porotherm 30 PROFI, extermal walls are extamal thermal contact insulation system.
|
guest ::
